Panel dividing saws SAWTEQ S-510 with lifting table
Panel dividing saws SAWTEQ S-510 with lifting table
A real powerhouse with automatic feeding: the SAWTEQ S-510 can easily be integrated in highly efficient production processes and can even accelerate them.
Equipped with a heavy-duty lifting table for automatic feeding and many innovative technologies, this saw will bring greater speed and precision into your manufacturing process.
Benefits
- Short production cycles due to automatic feeding
- Maximum cutting precision, achieved, for example, by the SORB TECH machine body and by positioning the saw blade by means ball-screw spindle
- Extremely reliable thanks to minimum tool wear
- Reduced dust emission thanks to innovative extraction geometry
Images
-
![]()
Automatic outfeed fence: pushes panel remnants from the rear machinetable across the cutting line to the front (option). -
![]()
dustEx air jets transport dust and chips towards the right-angled fence: improves extraction and prevents scratches. -
![]()
Micro-feed units for thin panels work very precisely thanks to a non-contact measuring system and shorten the cycle times (option). -
![]()
The panel labeling system saves time and guides the operator (option). -
![]()
Pneumatically operated trim stops: for precise positioning and safe processing of sensitive materials (option). -
![]()
The Power Concept Premium boosts output by up to 40 %, significantly shortens work cycles and reduces unit costs (option). -
![]()
Turning device for headcuts: significantly increases performance with suiTable cutting patterns and reduces the amount of handling required (option). -
![]()
The postforming unit ensures a chip-free cut for softforming and postforming panels (option). -
![]()
TilTable air cushiontable: prevents thin materials from sagging and increases the work surface (option).
Features
-
Innovative pressure beam guide principle for long service life and lasting precision
-
Saw body made of SORB TECH – advantages over steel girder designs:
– 10 times better vibration dampening
– 20% higher sound absorption
– 30% longer saw blade life
– 40% lower consumption of primary energy during its production -
Maintenance-free lifting table for automatic feeding from the rear
-
Control software CADmatic 5
– Intuitively understandable
– Full HD widescreen multi-touch monitor
– Harmonized user interface powerTouch
– The new 3D assistance graphic supports the operator and is intuitive to operate
– Ready for connection to tapio
– Graphically supported diagnostics
Technical Data
| Saw blade projection [mm] | 150 (170 as option) |
| Cutting length [mm] | 3,200 / 3,800 / 4,300 / 5,600 / 6,500 |
| Program fence speed [m/min] | up to 90 |
| Saw carriage speed [m/min] | up to 130 (150 as option) |
| Main saw motor [kW] | 50 Hz: 30 (47 as option) 60 Hz: 35 (54 as option) |
| Monitor | 24" full-HD multi-touch display |
| Operating software | CADmatic 5 |
(Previous product name: Panel dividing saw SAWTEQ B-500 | HPL 500)
Software
-
![]()
CADmatic 5
Simple, intuitive and ergonomic machine operation thanks to the 3D assistance graphic
quickTip—the assistance function for optimal machine settings—proactively makes setting recommendations
Reproduce parts easily, reliably and using a transparent process with the reproduction of parts option in CADmatic
-
![]()
materialManager Advanced
Proposes optimal parameters automatically on your saw, corresponding to your materials, tools and quality requirements.
Videos
Please confirm that when you use YouTube, data such as your IP address, browser identifier and similar may be transmitted to Google.
» Privacy Policy
Material in Bewegung – Lager, digitale Assistenzen und weitere Features
Die Gesamtlösung von der Beschickung bis hin zur Abstapelung
Brochures
Product Comparison
Lifting table saws for cutting
|
|
|
| |
|---|---|---|---|---|
| SAWTEQ S-210 lifiting table | SAWTEQ S-310 | SAWTEQ S-410 lifiting table | SAWTEQ S-510 with lifting table | |
| Cutting length [mm] | 3,200 | 3,800 / 4,300 | 3,200 | 3,800 | 4,300 | 5,600 | 3,200 | 3,800 | 4,300 | 5,600 | 3,200 | 3,800 | 4,300 | 5,600 | 6,500 |
| Saw blade projection [mm] | 65 (optional 80 or 95) | 80 (optional 95) | 110 (optional 125) | 150 (optional 170) |
| Program fence speed [m/min] | up to 80 | up to 90 | up to 90 | up to 90 |
| Saw carriage speed [m/min] | up to 80 (optional up to 120) | up to150 (optional 170) | 150 (optional up to170) | up to 130 (optional 150) |
| Left handed machine possible | - | |||
| Details | Details | Details | Details |
